Astaro Security Gateway 525
Operating Instructions
Starting shut down
1. Press the Enter key.
2. Press on the ▼ key three times.
The following message will be displayed: Shutting down
3. Press the Enter key.
The following message will be displayed: Are you sure?
With the up/down keys you can select Yes (y) or No (n).
4. Press the Enter key to confirm your settings.
The shut down action will now start.
6. Putting into operation
Caution:
Risk of explosion if battery is replaced by an incorrect type. Dispose
of used batteries according to the instructions.
Scope of supply
The supplied parts are indicated in the Hardware Quick Start Guide.
Mounting instructions
The Astaro Security Gateway 525 appliance is designed for use in racks.
Please consider the following security hints:
Important note:
The appliance is designed for use in rack systems. Functional
reliability outside of a rack cannot be guaranteed.
Warnings and precautions
The appliance can be operated safely if you observe the following notes and
the notes on the appliance itself.
Rack precautions
Ì
Make sure that the leveling jacks on the bottom of the rack are fully
extended to the floor with the full weight of the rack resting on them.
Ì
In single rack installation, stabilizers should be attached to the rack.
Ì
In multiple rack installations, the racks should be coupled together.
Ì
Always make sure the rack is stable before extending a component from
the rack.
Ì
You should extend only one component at a time—extending two or more
simultaneously may cause the rack to become unstable.
