Aston
®
Tire Changer ATC-5733 User’s Manual
17
www.astontechusa.com
of the machine is consistent.
◇
The machine is connected to the circuit, the circuit must be fitted with a fuse that is in
line with the operating rules. The automatic circuit breaker of 25A is required to be
operated by professional personnel. The power plug of the tire changer is provided with
the customer.
◇
The compressed air system is connected to the machine by a pipe joint on the right side
of the tank.
3.5.2 Debugging
◇
Step 1: turn on the power and gas supply, depress the Turntable Rotation pedal, turntable
should be clockwise. Raise the Turntable Rotation pedal, the turntable should be anti-
clockwise rotation. (If the turntable is opposite to the specified rotation direction, the
position of the two lines in the three-phase plug should exchange position.)
◇
The second step: depress the Bead Breaker Pedal, start the Bead Breaker device; when
the pedal is released, the Bead Breaker device to return to the original position.
◇
The third step: depress the Jaw Clamp Pedal, open the 4 clamps; release the Jaw Clamp
Pedal, the Jaw Clamps returns to the original position.
Operation declaration
4.1 Operating notes
◇
Check the connection of air pipe is in place, ensure that no air leakage, ensure the
operation space to meet the requirements, then start work.
◇
Before any operation, the gas in the tire is needed to be released, and the balance block
of the tire balancing device is removed.
4.2 Disassemble operation process
4.2.1 Bead Loosening
◇
Deflate tire completely by removing the valve core from the valve stem. To avoid
damaging the clamps and/or wheel, move the clamps to their full inward position before
