Aston
®
Tire Changer ATC-5733 User’s Manual
30
www.astontechusa.com
the tire increases. If this does not happen, a problem exists. Investigate carefully.
◇
Release air pressure from the tire by pressing the manual Pressure Relief Valve.
STAGE FOUR / TIRE INFLATION
◇
Make sure both beads are seated. When both beads are seated, the tire is ready for
inflation.
◇
Replace the valve core if it was removed.
CHECK TIRE PRESSURE FREQUENTLY. NEVER EXCEED 40 PSI WHILE SEATING
BEADS. ONCE SEATED, NEVER EXCEED TIRE MANUFACTURER’S
RECOMMENDED AIR PRESSURE. TIRES CAN EXPLODE, ESPECIALLY IF THEY ARE
INFLATED BEYOND THEIR LIMITS. AT ALL PRESSURE LEVELS WHEN INFLATING
THROUGH THE VALVE STEM, KEEP HANDS, ARMS, AND ENTIRE BODY AWAY
FROM INFLATING TIRE. AN EXPLODING TIRE, WHEEL, OR BEAD SEALING
EQUIPMENT MAY PROPEL UPWARD AND OUTWARD WITH SUFFICIENT FORCE TO
CAUSE SERIOUS INJURY OR DEATH TO OPERATOR OR BYSTANDER.
NEVER ATTEMPT TO MOUNT AND INFLATE MISMATCHED TIRES AND WHEELS.
MISMATCHED TIRE AND WHEEL COMBINATIONS CAN EXPLODE, CAUSING
PERSONAL INJURY OR DEATH TO OPERATOR AND BYSTANDERS. FOR SAFETY,
DO NOT ATTEMPT TO MOUNT AND INFLATE MISMATCHED TIRES AND WHEELS.
IF OPERATOR IS UNABLE TO OBTAIN BEAD SEAT, SOMETHING IS WRONG. DEFLATE
TIRE COMPLETELY, INSPECT TIRE AND WHEEL, CORRECT ANY PROBLEMS FOUND,
RE-LUBRICATE BOTH TIRE BEADS, AND REATTEMPT BEAD SEAL AND SEAT
PROCEDURES. FOLLOW ALL SAFETY INSTRUCTIONS IN THIS MANUAL AND ON
MACHINE