Aston
®
Tire Changer ATC-5733 User’s Manual
15
www.astontechusa.com
◇
The shipment should be thoroughly inspected as soon as it is received. The signed Bill
of Lading is acknowledgement by the shipping carrier as receipt of this product as listed
in your invoice as being in a good condition of shipment. If any of these goods listed on
this Bill of Lading are missing or damaged, do not accept goods until the shipping carrier
makes a notation on the freight bill of the missing or dam- aged goods. Do this for your
own protection.
3.1.4 Unpacking
◇
Check the packaging damage and
the rain and other damage
phenomenon, using the tool unpack
the packing as shown in Picture,
please dispose of packaging box,
lest the environmental pollution.
◇
Check the condition of the machine,
in accordance with the packing list
to check if there is any damage or
lost, once found contact the dealer
and manufacture immediately. If
you find that the leakage but still
installed, we will not assume any responsibility. If you have any questions, please do not
use the machine, the supplier contact.
3.2 Precautions during installation
◇
All bolts must be tightened.
◇
Power cord, no broken skin, no broken pipe, and other damage.
3.3 Main installation procedure
3.3.1 Standard configuration installation
◆
The first step: Place the machine on the chosen place, and then fix it to the ground by
fixing screw.
◆
The second step: Lift the tilting arm and insert the PU hose (G) into the hole (Fig3).
Figure 5