Aston Technologies Inc.
11
◇
After receiving the product, please inspect the machine package, transportation, and wet
damage phenomenon. If there is shipping damage or soaked by rain, please do not open
the package, but contact the seller. Such damage has been found in package but still
unpacked, missing pieces or some parts cannot be used and accidental injury etc., the
manufacturer will not bear any responsibility.
3.1.4
Unpacking
◇
Inspect package damages and rain
damages and other damages, using
the tool unpack the package as
shown in Picture 5, please dispose
of
package
box,
lest
the
environmental pollution.
◇
Inspect the condition of the
machine. Following the Packing
List to check if there is any damage
or lost. Once found such
phenomenon please contact the
seller or manufacture immediately.
If the users find that the leakage but still installed, the manufacturer will not assume any
responsibility. If there are any questions, please do not use the machine but contact the
supplier.
3.2
Precautions during installation
◇
All bolts must be tightened.
◇
Power cord, no broken skin, no broken pipe, and other damage.
3.3
Main installation procedure
3.3.1
Standard configuration installation
Step One
：
unscrew wooden pallet fixing screws and place the Tire Changer at the
installation site. (installation site must meet its requirements.)
Picture 5
