The Whirlpool tub comes equipped with a factory installed drain and overflow an
optional flexible drain hose is also provided to avoid having to move the floor
drain.
Please see the Drain diagram for the optional drain hose.
Use the following instructions for the standard straight drain:
1. Move the floor drain so that the floor drain and whirlpool tub drain are in line
when the whirlpool tub is in it's final position
2. With the whirlpool tub in it's final location make the plumbing connections
between the whirlpool tub and the floor drain.
Use these instructions for installation of the optional floor drain:
1. Apply sealant to the drain hose gasket and into the compression nut.
2. Install the hose, compression nut, and gasket assembly onto the lower drain
body.
3. Tighten the compression nut so that the gasket is compressed creating a
positive seal.
Optional drain connections
9
Flex drain hose
