Before you start
Thank you for purchasing your Aston shower door. We hope that it will provide you
with years of satisfying use and enjoyment.
Please read this manual carefully because it contains information and instructions
about the proper installation of the unit. If you do not follow certain conditions of
installation and maintenance, your warranty may be affected.
1. Inspect boxes for shipping damage. If the product has been damaged, is
missing parts, or has a finishing defect, please contact our customer support
department within 5 business days of delivery date.
2. NOTE: You should consult your local building codes with questions on
installation compliance standards. Plumbing and building codes vary by location.
3. Before installation, inspect installation surfaces or level and have to the
strength to support the heavy weight of this shower door assembly. This Shower
Door should only be installed using the connection point to the studs or to
pre-installed 2x6 wood reinforcements behind the wall.
4. This Shower Doors assembly is very heavy and requires professional
installation.
Aston Shower door's feature:
• Tempered Safety Glass
• High quality hardware
WARNING: The Aston Shower door is designed to be used with tiled walls.
If you are using a pre-made Acrylic/ABS/FRP shower stall that will be thicker
than average plus tile, then you must consider the offset of the pre-made
panel thickness. If applicable, the shower tray has 1/4" of tolerance for the
oversized wall thickness.
Certifications:
All Aston Shower doors are 3rd party tested to meet the following US, Canadian
and International Standards:
• CPSC 16 CFR1201 II/ ANSI Z97.1 - 2009 Class A
• CSA B45 Series -02
1
