Aston Global SD974-L, Installation And Owner'S Manual

As with any other luxury item, maintenance and care are critical to the long lasting

quality and enjoyment of your shower door and tray. The proper care and

maintenance outlined in this section are necessary to ensure the longevity of the
unit. Damage caused by not following the care and maintenance guidelines in this

section is not covered under the manufacturer's warranty.

The unit is constructed from high quality acrylic and with proper care the unit will

maintain its nice look and finish.

IMPORTANT:

  Never use an abrasive cleaner such as Comet or Ajax to clean the

acrylic surface. These cleaners will scratch the surface and dull the finish. In
addition, do not use any of the following products to clean the acrylic surface:

ϒ⁄

Acetone

ϒ⁄

MEK

ϒ⁄

Mineral spirits

ϒ⁄

any other solvent based cleaner

You can clean the acrylic surface with a mild non-abrasive cleaner such as Soft

Scrub or other cleaning products formulated for acrylic surfaces.

You can buff and polish the acrylic surface using any good polishing compound

such as Maguire's #10 Mirror glaze, toothpaste, or automotive polishing paste.

Using these types of products will help maintain the shine and luster of the acrylic

surface.

If you happen to discover any small minor surface scratches in the acrylic, you can

use 600# grit wet sand paper to lightly buff out any scratches, and then use a

surface polish to restore the shine and luster.

For deep scratches or chips where material has been removed, purchase an acrylic
repair kit, which is available through hardware stores and home centers. Read and

follow all of the instruction contained in the kit.

The glass doors and panels can be cleaned using any commercially available glass
cleaner.

We recommend that you clean the glass daily and squeegee the glass with a
silicone or rubber squeegee after each use to help prevent water spots.

Care and Maintenance

16