1. Remove and inspect the glass doors. If any are damaged or broken, please
contact your dealer or the manufacturer.
2. Determine which door is the right door and which is the left by locating the
two holes used for the door handles. When the doors are closed, the handles
will be next to each other in the center of the door opening.
Eight roller mount assemblies for the doors are located inside the unit on the
upper and lower aluminum rails.
3. Carefully disassemble each door roller mount assembly.
IMPORTANT:
Note the disassembly order of the roller mount assembly. It is
critical that the order be repeated for proper adjustments of the doors. Please see
the illustration provided.
4. Remove the decorative nut, locking nut, and plastic washer. Leave the plastic
Step 11 Install glass sliding doors
26
