If you wish to change the length of time for the steam cycle press the “time” button
up or down. The maximum set time is 99 minutes.
If you wish to change the set temperature, press the “temp” button up or down.
The maximum set temperature is 122 ?F (50 ?C).
If you wish to end the steam cycle before the timer has completed, press the
steam button to turn off the steam generator or the main power button.
Flushing the steam generator
WARNING:
Please use caution when flushing the unit immediately after use as
the unit may still contain hot water.
It is important to flush the steam generator to prevent any issues and maintain
the life span of the steam generator.
To flush the steam generator after completion of the steam cycle, press and hold
the ”steam” button for five seconds. The unit will begin to flush.
Continue pressing the “steam” button until the unit is fully flushed, and then
release the “steam” button.
If you fail to flush the steam generator after use the unit will automatically flush
four hours after you have turned the unit off.
Light
1.Press the main “on/off” button to turn on the power.
2.Press the “light” button to turn the light on.
3.Press the “light” button again to turn the light off.
Optional LED light - Some units have an optional LED light installed. To change
the functions of the LED light press the “light” button on and off to cycle through
the different settings.
Exhaust Fan
1. Press the main “on/off” button to turn on the power.
41
