Operating instructions Avero height adjustable bath
Product description.
The Avero is powered by a 24 volt control system, transformed from 230 volts within the system, it is
essential that the mains power is switched on at all times.
The Bath is intended for bathing clients who are capable of maintaining an upright sitting position.
Carry out the following checks before using the bath.
The bath is permanently connected to a 230 Volt mains electrical supply.
Check there are no signs of damage, and the bath is in good working condition.
Check there are no obstructions or items that may be trapped when the bath is operated.
Check the tub will raise and lower properly using the control pad.
Check the temperature of the water in the tub before use.
Instructions for use.
Tub Controls.
There are Two control pad options for the Tub, 3 Button and 7 Button, details are shown below.
See the diagrams for the individual control functions.
The green indicator LEDs on the panel will flash untill each individual control is turned on.
Press and hold the button for three seconds to turn off.
3 Button control pad
Tub raise
Tub lower
Autofill (optional)
7 Button control
Sensory Light
System ON/OFF
Tub raise
Tub lower
Autofill
(optional)
Air Spa
ON/OFF
Air Spa
Increase
intensity
Air Spa
Decrease
intensity
