Hardware Description
Dimensions
SIM installation
Note:
fitting the SIM will trigger the AT110 to power up.
The AT110 must be fitted with a SIM card (micro SIM, format 3FF) to allow access to a
GSM/GPRS/UMTS network services. The SIM card is installed in a small slot in the side of the
AT110. Correct orientation of the SIM card is essential for correct operation. Push the SIM card
into the slot until the edge is flush with the AT110 case. To remove the SIM card, simply push it
again, and it will spring out. SIM PIN must be disabled.
