DRV-28 inverter
s Basic operartion instructions
-32-
4.
No. Name
Instruction
2)
TRIP
Fault indicator;
LED on – in fault state
LED off – in normal state
LED blinking – in pre-alarm state
(3)
QUICK/JOG
Short-cut key indicator, which displays
different state under different functions,
see definition of QUICK/JOG key for
details
2
Button
area
(4)
Function key
The function of function key varies with
the menu;
The function of function key is displayed
in the footer
(5)
(6)
(7)
Short-cut key
Re-definable. It is defined as JOG
function by default, namely jogging. The
function of short-cut key can be set by
the ones of P07.12, as shown below.
0: No function ;
1: Jogging (linkage indicator (3); logic :
NO);
2: Reserved;
3: FWD/REV switch-over (linkage
indicator (3); logic: NC) ;
4: Clear UP/DOWN setting (linkage
indicator (3) logic: NC) ;
5: Coast to stop (linkage indicator (3);
logic: NC) ;
6: Switching running command reference
mode in order (linkage indicator (3);
logic: NC) ;
7: Reserved;
Note: After restoring to default values,
the default function of short-cut key
(7) is 1.
(8)
Confirmation
key
The function of confirmation key varies
with menus, eg confirming parameter
setup, confirming parameter selection,
entering the next menu, etc.
