DRV-28 inverter
s Basic operartion instructions
-35-
5.3 Keypad display
The display state of DRV-28 series keypad is divided into stop parameter display state, running
parameter display stateand fault alarm display state.
5.3.1 Stop parameter display state
When the inverter is in stop state, the keypad displays stop state parameters, and this interface is the
main interface during power-up by default. Under stop state, parameters in various states can be
displayed. Press
or
to shift the displayed parameter up or down.
Fig 5.3 Stop parameter display state
Press
or
to switch between different display styles, including list display style and progress
bar display style.
Fig 5.4 Stop parameter display state
The stop display parameter list is defined by the user, and each state variable function code can be
added to the stop display parameter list as needed. The state variable which has been added to the
stop display parameter list can also be deleted or shifted.
5.3.2 Running parameter display state
After receiving valid running command, the inverter will enter running state, and the keypad displays
running state parameter with RUN indicator on the keypad turning on. Under running state, multiple
kinds of state parameters can be displayed. Press
or
to shift up or down.
