© ASTRALPOOL 2008. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
Page 39 of 69
ENGLISH
1.1 PACKAGING
INSPECTION
This equipment is packaged using recyclable materials which can withstand even the most
difficult transportation conditions. Nevertheless, an inspection of the packaging should be done
upon receipt of the equipment in order to check for any damages, and to avoid incorrect
operation of the equipment.
Manufacturer will not be held responsible in this case.
IS VERY IMPORTANT TO KEEP THE PACKAGED EQUIPMENT UPRIGHT, THE
PACKAGING HAS BEEN SPECIFICALLY DESIGNED FOR THIS. ALWAYS MAINTAIN IT IN
VERTICAL POSITION.
IF THE UNIT IS DAMAGED, OR THE DELIVERY IS INCOMPLETE, MAKE A NOTE OF IT ON
THE CARRIER'S BILL AND IMMEDIATELY MAKE A CLAIM TO THE COMPANY IN
CHARGE OF DELIVERY.
The package includes the following elements:
•
Dehumidifier
unit.
•
Owner's
Manual.
•
Warranty.
2 EQUIPMENT DESCRIPTION.
The CDP dehumidifier (dehumidifying unit for swimming pools) is used in facilities requiring
individualised humidity control and temperature management, taking advantage of the existing
heat vapours and the equipment's heat output in order to warm the ambient air in small
swimming pools, bathtubs, dressing rooms and bathrooms.
2.1 GENERAL CHARACTERISTICS
Dehumidifying unit constructed of robust and lightweight magnesium aluminum alloy, corrosion
and solar radiation resistant. The colour does not fade, it has a reduced size and is very
lightweight. Equipped with the following:
◙
Monoblock evaporating and condensing coil constructed of copper tubing including
tempered aluminium fins (special for corrosive surroundings)
◙
Hermetically sealed compressor including internal protection, positive temperature
coefficient device and silencer.
◙
A cooling circuit made of heavy wall copper tubing, processed to repel rust.
◙
Centrifugal fan with various flow levels.
◙
Freon refrigerant gas
R407-C
which is not harmful for the ozone
(Ecological).
◙
Condensation plenum chamber made of galvanized steel.
◙
Wall-mounted unit with legs or wheel mounting option.
◙
Expansion valve with pressure equaliser.
