© ASTRALPOOL 2008. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
Page 52 of 69
ENGLISH
The machine is equipped with a one-meter hose for the elimination of condensed water.
During operation, condensed water will appear, produced by the passing of air through the
evaporation unit. For this, the machine is equipped with a drainage tube on the base. Please
plan ahead for the drainage.
This equipment is designed for interiors, the air inlets and outlets should be free of obstruction.
Obstacles should be maintained at a distance.
5 CONTROLLER
The HYG-E 7001/7005 is a combination of a hygrostat and a room temperatura controller for
use in swimming pools, bathtubs, dressing romos, bathrooms…
Make sure the unit is not exposed to direct water effects, such as water jets in pool halls.
Install the hygrostat in a horizontal position at the eye level.
The hygrostat must be installed on the local to be treated. Therefore, assuming that the
equipment is a built-in model, the hygrostat must me placed in the local where aspiration and
impulsion of the machine are headed to:
Figure 9: Controller.
5.1 WIRING
DIAGRAM
Figure 10: Controller wiring diagram.
