© ASTRALPOOL 2008. ALL RIGHTS RESERVED. CONFIDENTIAL AND PROPRIETARY DOCUMENT.
Page 56 of 69
ENGLISH
8.1 HOUSING
REMOVAL
The removal of the unit’s housing, to proceed with the various maintenance procedures, is to be
carried following these steps:
Starting on the initial position of the unit,
proceed to remove the two side screws
(1) & (2) that attach the housing:
Then proceed to tilt the housing as shown
in figure:
Then proceed to raise the housing to
release the closure of form at the top:
Finally, extract the housing:
Figure 12: Housing removal procedure.
(2)
(1)