13
Viron e-Quilibirum Series Chlorinator
Installation Manual
12
Viron e-Quilibirum Series Chlorinator
Installation Manual
5.3
Adjust Chlorine Output
In summer (or other heavy bathing times), chlorine
output should be set between 6 and 8. Check chlorine
level in your swimming pool regularly to determine
if the output should be increased or decreased. Rely
on a pool professional for additional advice on the
recommended chlorine level in your pool.
Free chlorine level should be between 1.0 ppm and 3.0
ppm.
1.
Press SET to change the chlorine output and the pH of
your pool.
2.
Press YES to change the setting.
Figure 14.
Change Chlorine Set Point
3.
Use up/down buttons to change the Set Point
between 0 and 8 pH.
NOTE:
0 chlorine output should only be used when
there is no salt in the water.
Figure 15.
Choose Set Point
5.4
Adjust pH Setpoint
pH in your pool should be set between 7.4 and 7.8.
Variations are determined by the type of pool you
have (concrete, fibreglass, vinyl liner). Rely on a pool
professional for additional advice on the correct pH
Set Point for your pool.
1.
Press SET to change the pH balance of your pool.
2.
Use up/down buttons to set your pH value.
Section 6. Bluetooth Setup
6.1
Connect via Bluetooth
The INSTALL function allows the unit to be set up
for your pool or spa and to pair your phone with the
Chlorinators Bluetooth connection.
1.
From MAINT press NEXT, NEXT
2.
Choose INSTALL.
3. ACCEPT the current Language.
INSTALL CHLORINATOR is displayed.
4. Press NEXT.
INSTALL BLUETOOTH is displayed.
5. Press ACCEPT.
A 4 digit BLUETOOTH ACCESS CODE is displayed.
Keep this unique code to enter into the ChlorinatorGo
App and set up your chlorinator in the App.
6.2
Install the App
Download the ChlorinatorGo App from either the
Apple App Store or Google Play.
From the App:
1.
Press
+
2.
Enter your 4-digit ACCESS CODE .
3.
Press from above and press Save.
4.
Type a name for your Chlorinator.
6.3
Pair the Chlorinator
From the App:
1.
Choose the name of your chlorinator.
2.
Your phone will connect to the chlorinator.
3.
The App Home Page is displayed.