background image

23

Viron e-Quilibirum Series Chlorinator    

Installation Manual

22

Viron e-Quilibirum Series Chlorinator    

Installation Manual

 For full warranty terms and conditions and to register your warranty, visit

 www.

astralpool.com.au/warranty

 and complete your details. Or scan the QR code to 

go directly to the registration page

Record your equipment details here for quick reference:

Model No. : ____________________________________

Serial No. :  ____________________________________

Section 13.  Warranty 

13.1  Warranty Terms

This product is sold with a limited factory warranty. For 

warranty terms and conditions, please visit:  

www.astralpool.com.au

All warranty issues should be resolved with your 

AstralPool dealer or place of purchase. Claims must 

include the serial number and model (this information 

can be found on the product), installation date, and 

name of the installer. Shipping costs are not included i 

the warranty coverage.

The warranty does NOT cover damage caused by 

improper assembly, installation, operation or filed 

modification. Also, any damage caused by improper 

water chemistry will NOT be covered by the warranty.

NOTE:  Keep this manual in a safe place for future reference 

when inspecting or servicing the product.

13.2  Consumer Information and Safety

The product is designed and manufactured to 

provide many years of safe and reliable service when 

installed, operated, and maintained according to the 

information in this manual and the installation codes 

referred to throughout. Be sure to read and comply 

with all warnings and cautions. 

Summary of Contents for Viron EQ

























Reviews: