Photo 9
If the connection was successful then the red rectangle will turn green, and by smoothly
moving the telescope you will see the corresponding crosshairs in the star field of the
planetarium program. Further, to make the planetarium "understand" where the telescope is
directed, it is necessary to make a telescope alignment on two stars. To do this, aim the
telescope at a previously known, bright star.
Right-click the same star on the planetarium screen, and click in the Telescope / Synchronize
menu that appears. Do the same with another star in advance. If during the transfer of the
telescope to another star it is found that the crosshairs on one or both axes are moving in the
opposite direction, change the sign in the corresponding field of the number of steps /
impulses of the encoders in position 6, 7 in photo 9 and perform the procedure of binding the
telescope to two stars again. If everything went well, then smoothly moving the telescope
tube you can start to make a fascinating tour through the infinite expanses of the universe.
Thank you for purchasing DobsonDream controller
Pleasant observations to you ....
