background image

1

ASTRO-PHYSICS

GTO KEYPAD

Version 4.17 Addendum

Plus Supplemental Information for Customers Outside of North America 

and the Revised GTO Quick Star Drift Method of Polar Alignment

KEYPAD VERSION 4.17

Version 4.17 Release Notes - 10-20-08

Version 4.17 replaces v.4.16 from 7-7-08 which had a bug that caused occasional random freeze-ups during 

initialization of the mount, especially when resuming from Reference Park 1.

Version 4.16 replaced v.4.15 from 3-24-08 which had a bug that only affected older keypads – Serial numbers 

1490GTO and earlier.

Eastern Longitudes

●●●The●accuracy●of●eastern●longitude●values●that●are●sent●to●the●mount●has●been●improved●by●

including●minutes●in●the●calculation.●●●We●are●unable●to●add●seconds●into●the●calculation●at●this●time,●due●to●memory●

space●limitations●in●the●keypad.

Eastern Time Zones When Polling the Mount

●●●●The●3=Get●Time/Loc●FrMnt●command●(how●you●“poll”●the●mount)●

now●returns●correct●time●zone●values●for●people●in●eastern●longitudes●using●the●GTOCP3●control●box.●●(GTOCP1●&●2●

control●boxes●already●returned●the●correct●time●zone●values●in●version●4.12●and●continue●to●do●so●in●version●4.16)

Shipping Notice

●●●●Because●these●changes●only●applied●to●eastern●longitudes,●a●small●number●of●keypads●with●v.4.12●

were●shipped●to●US●addresses●after●the●March●24,●2008●introduction●of●v.4.15.●●●A●larger●number●of●keypads●were●

also●shipped●with●v.4.15,●which●contained●a●bug●that●only●affected●older●keypads●(S#1490●and●earlier).●●●Because●this●

bug●only●affected●older●keypads,●it●was●of●no●consequence●to●these●new●keypads.●●●That●bug,●however,●was●fixed●

with●v.4.16●which,●unfortunately,●had●its●own●problem●during●initialization.●●Keypads●shipped●between●March●and●

CONTENTS

KEYPAD●VERSION●4.17●

1

Version●4.17●Release●Notes●-●10-20-08●

1

Special●Notice●to●Mach1GTO,●1600GTO●and●3600GTO●Owners●

2

Summary●of●Remaining●Keypad●Issues:●

2

Eastern●Longitude●Values●●

2

Western●Longitudes●with●Eastern●Time●Zones●●

3

Incorrect●GMT●Offsets●When●Polling●the●Mount●from●the●Keypad●●

3

Western●Longitudes●at●Time●Zone●Zero●●

3

Eastern●Longitudes●and●Time●Zone●12●●●●

4

Eastern●Longitude●Limit●●

4

The●International●Date●Line●●●●●

4

Fractional●Time●Zones●●●●

4

COMMAND●LANGUAGE●/●TROUBLESHOOTING●UPDATE●

4

Motor●Stalls●in●GTOCP1●and●GTOCP2s●with●the●E1●or●KE1●Chip●

4

Horizon●Check●in●the●Servo●

5

Variable●Tracking●

5

REVISED●GTO●QUICK●STAR●DRIFT●METHOD●OF●POLAR●ALIGNMENT●●

6

GTO●Quick●Star●Drift●Method●of●Polar●Alignment●Quick●Reference●Sheet●

10

December●18,●2012

Summary of Contents for GTO KEYPAD











Reviews: