Providing the Astronomical Community with Premier Products and Services
Astro-smart.com Copyright
© 2010-2049, All rights reserved
Oct 2020
Page 38
Steps to load ASCOM driver.
1.
Load ASCOM setup installer on CD.
2.
Select Astro-Smart Observing Conditions Driver under Sequence Generator Pro Environmental interface.
3.
Select com port attached to
SMP family controller
unit and click on Done button which should close Astro-Smart
configuration window.
4.
Connect ASCOM driver via chain link icon next to wrench icon for Astro-Smart Driver.
5.
Environmental Data should appear for
SMP family controller
unit and update every 8-10 secs.
ASCOM Example Using Sequence Generator Pro.
1.
Start Sequence Generator PRo.
2.
Open Environmental ASCOM interface Setup Tab.
3.
Select ASCOM Astro-Smart Observing Conditions and choose the following ASCOM driver.
4.
Pull down the com port and highlight the correct port the SMP-PRO/R is connected to.