ABOT4001 REV1
BATTERY POWERED CRIMP TOOL
DATASHEET
________________________________________________________________________________________________
ABOT4001 rev1-DS
©2014 Astro Tool Corp., All Rights Reserved Page 1 of 8
REV. A
3/3/2016
Astro Tool Corp.
21615 SW Tualatin-Valley Hwy. Beaverton, OR 97003
Phone: 503-642-9853 Fax: 503-591-7766 Email: sales@astrotool.com
Figure 1
Description
The “ABOT4001 rev1” is a handheld Battery Powered Crimp
tool. It uses dies engineered to meet the requirements of
the AS22520/40-01 and is intended to crimp insulated
terminals, splices, and endcaps manufactured to AS7928
(MIL-T-7928): AS25036 (MS25036), AS17143 (MS17143),
and AS25274 (MS25274).
This tool produces crimped assemblies that comply with the
IPC/WHMA-A-620-A Industry Guidelines for Stamped and
Formed-Closed Barrel-Insulation Support Crimps.
Safety
Safety is essential in the use and maintenance of Astro tools
and equipment. Observation of all safety information
provided in this manual, as well as any marking on the tool,
will avoid hazards and unsafe practices related to the use of
this tool.
Purpose of this Manual
This manual is intended to familiarize all personnel with the
safe operation and maintenance procedures for the following
Astro tool:
ABOT4001 rev1 Battery Powered Crimp Tool
Keep this manual available to all personnel. Replacement
manuals are available upon request at no charge.
All specifications are nominal and may change as
design improvements occur. Astro shall not be liable
for damages resulting from misapplication or misuse
of its products.
KEEP THIS MANUAL
