background image

 

ABOT4001 REV1

 

                                                                              

 

BATTERY POWERED CRIMP TOOL

 

 

DATASHEET 

 

________________________________________________________________________________________________ 

ABOT4001 rev1-DS 

©2014 Astro Tool Corp., All Rights Reserved            Page 8 of 8 

REV. A 

 

3/3/2016 

 
 

                                                 Astro Tool Corp. 

 

                                                 21615 SW Tualatin-Valley Hwy. Beaverton, OR 97003 

 

                                              Phone: 503-642-9853 Fax: 503-591-7766 Email: sales@astrotool.com 

The following are the possible conditions shown by 
the right hand yellow LED. 

 
Flashing indicates trouble with the cooling fan system.  
Ensure that all cooling vents, and battery connections are 

free of dust or debris.  If flashing continues, return the unit 
to Astro Tool for repair. 

 
Continuous illumination indicates that a conditioning charge 

is occurring.  This happens when the battery being charged is 
either at a very low or very high temperature.  This can also 
occur if you attempt to charge a fully charged battery.  These 

conditions will increase charging times. 
 

Other conditions indicated by charger LED’s 
 
Flashing Red with Green off

: Charger is overheated.  

Unplug charger, and allow it to cool down. 
 

Flashing Red, with Flashing Green

: Battery is defective. 

 

Spare Battery Parts 

120 VAC Battery Charger 

ABTC-110 

240 VAC Battery Charger 

ABTC-240 

18V Replacement Battery 

ABT-100 

120 VAC Power Adapter  

 

230 VAC Power Adapter  

 

 
 

Astro Tool offers complete refurbishing and recalibration 
services.  Contact Customer service at 

Sales@astrotool.com

 

for more information. 
 
 

Limitation of Liability 

 

ASTRO TOOL CORP. IS NOT LIABLE FOR CONSEQUENTIAL 
OR SPECIAL DAMAGES OF ANY NATURE OR KIND 

RESULTING FROM THE USE, OR MISUSE, OF ANY OF ITS 
PRODUCTS.  OWNERS AND USERS OF ASTRO TOOL 

PRODUCTS ASSUME FULL RESPONSIBILTY FOR 
INSTRUCTING THEIR EMPLOYEES IN THE PROPER AND 

SAFE USE OF SUCH PRODUCTS. 
 

 

Limited Warranty 

 

Astro Tool Corp. warrants each new product sold by it to be 
free from defects in material and workmanship under normal 

use and service.  Astro Tool’s obligation under this warranty 
is limited to the free correction or, at Astro Tool’s option, the 
refund of the purchase price of any such product which 

proves defective in normal service within ninety (90) days 
after delivery to the first user, provided that the product is 

returned to Astro Tool with all transportation charges prepaid 
and which shall appear to Astro Tool’s satisfaction, after 

Astro Tool’s inspection, to have been defective in material 
and workmanship, it being understood that Astro Tool 
products are not consumer products.  This warranty shall not 

cover any damage to any product which, in the opinion of 
Astro Tool, was caused by normal wear, misuse, improper 

operation, tampering, neglect or accident.  This warranty is in 
lieu of all other warranties expressed or implied.  No 
warranty, expressed or implied, is made or authorized to be 

made or assumed with respect to products of Astro Tool 
Corp. other than those herein set forth.   

 
 

 

 
 

Summary of Contents for ABOT4001









Reviews: