02
1/2" THOR Impact Wrench
1894
INTENDED USE OF THE TOOL
The 1/2" THOR Impact wrench was designed as a maximum duty air impact wrench for use with high
quality impact rated sockets on large bolts and fasteners. Do not use this tool outside of the designed
intent. Never modify the tool for any other purpose or use.
BEFORE USE
Before use, check the parts diagram and part number listing on page 5-6 to make sure all parts are
included. If any parts are missing or damaged, please call your distributor.
SPECIFICATIONS:
PRODUCT INFORMATION
CAUTION: TO HELP PREVENT PERSONAL INJURY.
• Use of this product can expose you to chemicals including ethylene glycol, gasoline vapors and
engine exhaust, which are known to the State of California to cause cancer, birth defects, or
reproductive harm. For more information, visit www.P65Warnings.ca.gov. Always wear ANSI
approved safety equipment, safety glasses and clothing when using this product.
Study, understand, and follow all instructions provided with this product. Failure to read and follow
all warnings and operating instructions may result in damages and serious injury or death.
• Always wear ANSI approved goggles when using this product. (Users and Bystanders).
• Never use this tool for any application other than for which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool, modification of the tool, or use of the tool with
accessories not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size and design for the job that you are
attempting to perform.
• Always work in a clean, safe, well-lit, organized and adequately equipped area.
• Do not begin repairs without assurance that vehicle is in secure position, and will not move during repair.
• In order to reduce their exposure to such chemicals, users should always:
- work in well-ventilated areas.
WARNING
- wear appropriate safety equipment and clothes that are
specifically designed to filter out microscopic particles.
Max Torque:
Free Speed:
Weight:
Length:
Vibration (m/s ):
2
940 ft-lbs (1,274 N-m)
7000 rpm
4.94 lb ( 2.24 Kg )
6.7"/168 mm
5.12
6.5 cfm
86/97 dBA
3/8" NPT (1/4" NPT adapter included)
3/8" w/ HI-FLOW fittings
Air Consumption @ 90psi:
Sound Pressure/Power:
Air Inlet In.:
Minimum Hose Size:
• Patented oversized floating air motor and twin-hammer assembly put the weight over the user's hand
for balance, and allow for industry leading power at only 6.7" in length
• Rated 940 ft-lbs traditional Max Torque (compare to 1,600 ft-lbs nut-busting or bolt-breakaway)
