Programming with the HE programming software
Operating Instructions V 112 -
Version 07-2009A
Page 12
Setting the audio standard
To set the audio standard, you must first click on the
Sound
standard button
in the Output parameters area of the window
for the
Parameters of the plug-in card
. The settings of the
sound standard
window now opens (see Figure 8).
Figure 8: Setting the audio standard
Follow the steps below to set the audio standard:
A
UFGABE
1.
Select in the top left corner one of the options "N2”, "NICAM“ or
"NICAM I” by enabling the relevant button.
2.
Select the picture/audio carrier spacings for the 1st and 2nd
sound carriers from the respective drop-down list (see left).
3.
Enter the sound carrier level for channels A and B in the input
fields for the 1st and 2nd sound carrier for each channel.
4.
You can apply the configuration changes to the plug-in card
again by clicking on the
Program card
button in the top right
of the
Parameters of the plug-in card
window (see
left).
E
RGEBNIS
:
You have now set the audio standard.
Summary of Contents for V 112
Page 1: ...Version 07 2009A ...
