ASTRO X-5 twin AV, Operating Instructions Manual

13 Accessories

14

X-BC … Buscontroller

X- BC 1

The headend bus controller is for centrally setting all bus-capable headend devices via PC. Maintenance and 

e-programming of already set up headends can be done via modem. 

Operation is only possible with the HE programming software!

●

Control of up to 240 bus-capable headend devices

●

Can be individually set, from ring tone to call reception (i.e. parallel operation with other terminals is possible) 

●

8-digit identification code protects against unauthorized remote access

●

Internal monitoring timer protects against excessive telephone charges (automatic hang-up if there is no communicati-
on within five minutes) 

●

Operating software can be updated via serial interface (i.e. software updates without installation work) 

X-BC 2 – additional features

●

Remote control via GSM modem

●

Error messaging via SMS (alarm messaging to max. 3 phone numbers)

●

4 time partitions can be set (for each time partition 6 switching times can be defined) 

X- BC 1 

X- BC 1 Rückseite/

KC 3

Typ

X-BC 1  

X-BC 2 

Order no.

330401

330400

Supply voltage

[DC]

6 V 

through plug-in power supply unit

(230V~/50Hz)

Current consumption

[mA]

35

Permitted ambient temp.

[°C]

-15 … +50

KC 3 external programming unit       for programming all setting parameters (order no.: 330 650)