ASTRO X-5 twin AV, Operating Instructions Manual

5.3 Grounding

•

The equipment must be correctly grounded and
installed in compliance with EN 50 083 Part 1.

6 

Connecting to subscriber network

Cabling:

•

Integrated coupling field in X-5 twin... routes the 5 
channel pairs to the HF output socket.

•

Connect the X-5 twin… devices together using 
distributor set components.

•

Connect to subscriber network.

Note:

•

Connect plugs carefully and correctly.

•

Use only quality components.

7 

Connecting and commissioning 

Check:

•

All safety instructions in Chapter 2 observed (p. 4)

•

Installation and grounding as in Chapter 5 (p. 8)

•

Connecting to SAT equipment as in Chapter 6 (p. 9)

•

Connection to distributor network as in Chapter 7 (p. 10)

•

After connecting the mains cable to the power supply, 
the device is in operation.

8 Programming

Connecting the KC 3 programming device:

•

Plug-in KC 3 programming device via Sub-D connection

•

After approx. 10 seconds, the start menu appears on 
the display 

9

6 Connecting and commissioning 

8 Programming

☞

HSA X-Serie
Version X.XX
(Weiter mit < >)

LNC-Power
XY-Eingang   AUS
Busadresse   241
Passwort       AUS

04: TWIN1-A E02
SAT-Freq  1432 MHz
AusFreq  362,2 MHz
Kanal                S28

The KC 3 software is separated in 3 main sections:

1. Version number:

The menu “version number” is displayed only after the KC
3 device is connected. Please specify this number 
when contacting our service staff. You can reach this 
menu only after disconnecting and reconnecting the KC 3.
Start input by pressing the 

←

or

→

- keys.

2. Main menu:

•

Setting the LNC – power supply:
Select line 2 with the 

↑

or

↓

- arrow – keys; use the 

←

or

→

- arrow keys to switch on / off the LNB power 

supply and then save your settings. 

•

Changing the bus address:
Select line 3 with the 

↑

or

↓

- arrow – keys; use the 

←

or

→

- arrow keys to change the address sequentially 

or use the keypad.

•

Password function:
Select line 4 with the 

↑

or

↓

- arrow – keys; use the 

←

or

→ 

- arrow keys to activate / deactivate the 

password function.

•

Selecting a slot:
Select line 1 with the 

↑

or

↓

- arrow – keys; use the 

←

or

→

- arrow keys to move to the next slot

3. Submenu of the plug-in cards:

In the submenu of the plug-in cards, the type of card, the 
chosen tuner, the input parameters and the output para-
meters of the installed card are displayed. 
All important parameters can be adjusted. 
Follow the operating instructions of the respective plug-in card