2
Installation and connection
2.1
Installation in the base unit
Install the plug-in card in accordance with the descrip-
tion.
Important:
The X-A/V quad must not be used in conjunction
with any other base units than those listed above.
Remove the covers from the
base device (plug-in card slot)
and insert the supplied female
connectors. Check that the
post connectors are correctly
positioned on the plug-in card
and on the adapter PCB..
2 Installation and connection
2 Installation and connection
4
☞
☞
Insert the plug-in card and
push on the post connectors
(observe the correct orienta-
tion).
V16.13
X-8