2 Installation and connection
3 Programming with the HE programming software
5
3
Programming with the HE programming
software
Once it has been installed in the base device, the X-A/V
quad card can be programmed with the HE program-
ming software. After the base unit has been read out,
the overview window of the base unit will show the X-
A/V quad card on the slot on which it is installed.
2.2
Connection of source devices
A VCP 15-2 connecting cable (order no.: 350151; 1.4
m) is required in order to connect an A/V audio source
device, such as a DVD player, camera etc. The cable
has a 15-pole Sub-D connector at one end and 2x 3-
way Cinch/RCA connectors at the other end.
VCP 15-2