If you have the ROTARION mounted on your telescope,
now remove it carefully from your telescope and perform
the following operations on a table.
To mount the ROTARION PRIME FOCUS accessory you
must release the [POS-4] position of the ROTARION where
you will install it, selecting and relocating 3 optics or
eyepieces in the ROTARION:
1.
First unscrew (A) to remove all the elements of group
(B) that form the eyepiece assembly of the smaller
number of mm eyepiece and greater magnification or
power, Baader Click-Lock and the "Extenders" (if any)
of the [POS-4]
position, except the part with ring "T2
male to T2 male" threaded to the red carousel of the
ROTARION.
2.
Unscrew and remove the group (C) from the upper
drawing corresponding to the [POS-3] formed by the
eyepiece, the Click-Lock Baader and the "Extenders",
leaving the piece with central ring of double thread
40mm
m
17mm
m
8mm
40mm
m
28mm
17mm
m
(A)
(B)
(C)
Summary of Contents for Rotarion Photo
Page 1: ......
