An easy collimation verification method is to look
through the shutter (VIII) from the top of the
ROTARION. This way you can verify the centering of
the shutter with respect to the optics mounted in the
ROTARION.
6.
Once the required 4-5mm height has been obtained
between the shutter and the optics mounted on the
ROTARION and the alignment, centering or
collimation of the optical axis between the ROTARION
and ROTARION PHOTO, tighten the 3 tightening nuts
(III) by stop with the 3 red radiators (II) of the
ROTARION PHOTO to fix the system.
NOTE: The height adjustment system is designed so that
you can do it without tools. Although the procedure is by
trial and error and is laborious, once you have obtained the
necessary adjustment, the ROTARION PHOTO tripod is
rigid and stable for the support of cameras and filter
wheels. And it is fully automatic when you order a change
of optics in the ROTARION.
When the automatic electromechanical shutter of the
ROTARION PHOTO is without electrical power, it is in the
inward/back position.
¡No OK!
¡OK!
Summary of Contents for Rotarion Photo
Page 1: ......
