4.
The "Zoom Effect"
With the object centered on the eyepiece and focused, by
pressing the [POS-2] button of the ROTARION REMOTE
CONTROL software, the ROTARION changes the eyepiece
on the [POS-1] to the eyepiece [POS-2] with increased
power or magnification.
[POS-1]
[POS-2]
Now you must focus the telescope again. The observed
image should be larger and have less visual field. Center
the image again in the eyepiece (B).
[POS-2]
Centered NOT OK
. [POS-2]
Centered OK.
(B)
Subsequently, you can increase the magnification of your
telescope by changing to the following eyepieces of
smaller number of mm and higher magnifications, [POS-3]
and [POS-4].
As long as you perform the object centering procedure on
the eyepiece before switching to the next eyepiece, the
object will appear in your field of view.
Summary of Contents for Rotarion Photo
Page 1: ......
