6 - 3 2
6 - 3 2
6 - 3 2
6 - 3 2
6 - 3 2
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
C h a p t e r 6 : R A I D c o n f i g u r a t i o n
6.3.1
6.3.1
6.3.1
6.3.1
6.3.1
Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)
Creating a RAID 0 set (Stripe)
To create a RAID 0 set:
1.
From the utility main menu, select 1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e
1 . C r e a t e R A I D V o l u m e, then
press <Enter>. This screen appears.
2.
Enter a name for the RAID 0 set, then press <Enter>.
3.
Highlight R A I D L e v e l
R A I D L e v e l
R A I D L e v e l
R A I D L e v e l
R A I D L e v e l, press the up/down arrow key to select
|R A I D 0 ( S t r i p e )
R A I D 0 ( S t r i p e )
R A I D 0 ( S t r i p e )
R A I D 0 ( S t r i p e )
R A I D 0 ( S t r i p e ), then press <Enter>.
4.
Highlight the D i s k s
D i s k s
D i s k s
D i s k s
D i s k s item, then press <Enter> to select the hard disk
drives you want to include in the RAID set. The S E L E C T D I S K S
S E L E C T D I S K S
S E L E C T D I S K S
S E L E C T D I S K S
S E L E C T D I S K S screen
appears.
5.
Use the up/down arrow key to highlight a drive, then press <Space> to
select. A small triangle marks the selected drive. Press <Enter> after
completing your selection.
Intel(R) Matrix Storage Manager Option ROM v5.0.0.1032 ICH7R wRAID5
Copyright(C) 2003-05 Intel Corporation. All Rights Reserved.
[
CREATE ARRAY MENU
]
[
DISK/VOLUME INFORMATION
]
Enter a string between 1 and 16 characters in length that can be used
to uniquely identify the RAID volume. This name is case sensitive and
cannot contain special characters.
Name:
RAID Level:
Disks:
Strip Size:
Capacity:
Volume0
RAID0(Stripe)
Select Disks
128KB
0.0 GB
Create Volume
[
SELECT DISKS
]
[
↑
↑
↑
↑
↑↓
↓
↓
↓
↓
]-Previous/Next [SPACE]-Selects [ENTER]-Selection Complete
Port
Drive
Model
Serial #
Size
Status
0
XXXXXX
XXXXXX
XX.XGB
Non-RAID Disk
1
XXXXXX
XXXXXX
XX.XGB
Non-RAID Disk
2
XXXXXX
XXXXXX
XX.XGB
Non-RAID Disk
3
XXXXXX
XXXXXX
XX.XGB
Non-RAID Disk
Select 2 to 4 disks to use in creating the volume.
[
↑
↑
↑
↑
↑↓
↓
↓
↓
↓
]-Select
[ESC]-Exit [ENTER]-Select Menu
