manualshive.com logo in svg

Asus 1U Rackmount Barebone Server RS120-E3 (PA4), User Manual

The Asus 1U Rackmount Barebone Server RS120-E3 (PA4) is a high-performance server solution designed for professional use. This compact server offers impressive features and flexibility. To fully utilize its functionalities, a comprehensive and user-friendly User Manual is available for free download from 88.208.23.73:8080, ensuring a seamless setup and optimal performance.

Share
Download
background image

C h a p t e r   2 :     H a r d w a r e   s e t u p

C h a p t e r   2 :     H a r d w a r e   s e t u p

C h a p t e r   2 :     H a r d w a r e   s e t u p

C h a p t e r   2 :     H a r d w a r e   s e t u p

C h a p t e r   2 :     H a r d w a r e   s e t u p

2 - 1 8

2 - 1 8

2 - 1 8

2 - 1 8

2 - 1 8

2.7

SATA backplane cabling

F A N _ I N 1   c o n n e c t s   t h e   f a n   c a b l e

F A N _ I N 1   c o n n e c t s   t h e   f a n   c a b l e

F A N _ I N 1   c o n n e c t s   t h e   f a n   c a b l e

F A N _ I N 1   c o n n e c t s   t h e   f a n   c a b l e

F A N _ I N 1   c o n n e c t s   t h e   f a n   c a b l e

f r o m   F R N T _ F A N 4   o n   t h e   M B

f r o m   F R N T _ F A N 4   o n   t h e   M B

f r o m   F R N T _ F A N 4   o n   t h e   M B

f r o m   F R N T _ F A N 4   o n   t h e   M B

f r o m   F R N T _ F A N 4   o n   t h e   M B

C o n n e c t   t h e   s y s t e m   f a n   c a b l e s

C o n n e c t   t h e   s y s t e m   f a n   c a b l e s

C o n n e c t   t h e   s y s t e m   f a n   c a b l e s

C o n n e c t   t h e   s y s t e m   f a n   c a b l e s

C o n n e c t   t h e   s y s t e m   f a n   c a b l e s

C o n n e c t   t h e   S A T A   H D D s

C o n n e c t   t h e   S A T A   H D D s

C o n n e c t   t h e   S A T A   H D D s

C o n n e c t   t h e   S A T A   H D D s

C o n n e c t   t h e   S A T A   H D D s

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   a   8 - p i n   p l u g

C o n n e c t s   a   8 - p i n   p l u g

C o n n e c t s   a   8 - p i n   p l u g

C o n n e c t s   a   8 - p i n   p l u g

C o n n e c t s   a   8 - p i n   p l u g
f r o m   p o w e r   s u p p l y

f r o m   p o w e r   s u p p l y

f r o m   p o w e r   s u p p l y

f r o m   p o w e r   s u p p l y

f r o m   p o w e r   s u p p l y

C o n n e c t s   t h e   S A T A

C o n n e c t s   t h e   S A T A

C o n n e c t s   t h e   S A T A

C o n n e c t s   t h e   S A T A

C o n n e c t s   t h e   S A T A
c a b l e   f r o m   S A T A 1

c a b l e   f r o m   S A T A 1

c a b l e   f r o m   S A T A 1

c a b l e   f r o m   S A T A 1

c a b l e   f r o m   S A T A 1
( P o r t 0 )   o n   t h e   M B

( P o r t 0 )   o n   t h e   M B

( P o r t 0 )   o n   t h e   M B

( P o r t 0 )   o n   t h e   M B

( P o r t 0 )   o n   t h e   M B

C O N 1 _ F A N       C O N 2 _ F A N               C O N 3 _ F A N

C O N 1 _ F A N       C O N 2 _ F A N               C O N 3 _ F A N

C O N 1 _ F A N       C O N 2 _ F A N               C O N 3 _ F A N

C O N 1 _ F A N       C O N 2 _ F A N               C O N 3 _ F A N

C O N 1 _ F A N       C O N 2 _ F A N               C O N 3 _ F A N  C O N 4 _ F A N

  C O N 4 _ F A N

  C O N 4 _ F A N

  C O N 4 _ F A N

  C O N 4 _ F A N

*The system fans rotate at full speed during power on when the backplane
FAN_IN1 connector cable is not connected to the FRNT_FAN4 connector
on the motherboard.

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   t h e   d e v i c e   f a n   c a b l e

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

S A T A 2   ( P o r t 1 )   o n   t h e   M B

S A T A 2   ( P o r t 1 )   o n   t h e   M B

S A T A 2   ( P o r t 1 )   o n   t h e   M B

S A T A 2   ( P o r t 1 )   o n   t h e   M B

S A T A 2   ( P o r t 1 )   o n   t h e   M B

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

S A T A 3   ( P o r t 2 )   o n   t h e   M B

S A T A 3   ( P o r t 2 )   o n   t h e   M B

S A T A 3   ( P o r t 2 )   o n   t h e   M B

S A T A 3   ( P o r t 2 )   o n   t h e   M B

S A T A 3   ( P o r t 2 )   o n   t h e   M B

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

C o n n e c t s   t h e   S A T A   c a b l e   f r o m

S A T A 4   ( P o r t 3 )   o n   t h e   M B

S A T A 4   ( P o r t 3 )   o n   t h e   M B

S A T A 4   ( P o r t 3 )   o n   t h e   M B

S A T A 4   ( P o r t 3 )   o n   t h e   M B

S A T A 4   ( P o r t 3 )   o n   t h e   M B

Summary of Contents for 1U Rackmount Barebone Server RS120-E3 (PA4)













































































































































































Reviews:

No comments

Related manuals for 1U Rackmount Barebone Server RS120-E3 (PA4)

Basalte CORE PLUS Installation Manual preview
CORE PLUS
Brand: Basalte Pages: 2
IBM NetVista N2800e Reference Manual preview
NetVista N2800e
Brand: IBM Pages: 82
Patton electronics PeNet 2127 User Manual preview
PeNet 2127
Brand: Patton electronics Pages: 16
Supermicro SUPERSERVER 8045C-3R User Manual preview
SUPERSERVER 8045C-3R
Brand: Supermicro Pages: 118
Seyeon Technology FlexWATCH 1110L User Manual preview
FlexWATCH 1110L
Brand: Seyeon Technology Pages: 96
Acrosser Technology AND-APL1E Series User Manual preview
AND-APL1E Series
Brand: Acrosser Technology Pages: 42
Asus RS520-X5 PS8 User Manual preview
RS520-X5 PS8
Brand: Asus Pages: 150
Asus RS300-E6 Series User Manual preview
RS300-E6 Series
Brand: Asus Pages: 162
Asus RS161-E5 - 0 MB RAM Service Manual preview
RS161-E5 - 0 MB RAM
Brand: Asus Pages: 124
Asus RS161-E4 PA2 User Manual preview
RS161-E4 PA2
Brand: Asus Pages: 126
Asus RS700-X7/PS4 User Manual preview
RS700-X7/PS4
Brand: Asus Pages: 182
Asus RS162-E4 RX4 User Manual preview
RS162-E4 RX4
Brand: Asus Pages: 164
Asus RS400-E8-PS2 User Manual preview
RS400-E8-PS2
Brand: Asus Pages: 178
Asus RS120-E4 - 0 MB RAM User Manual preview
RS120-E4 - 0 MB RAM
Brand: Asus Pages: 174
Asus RS260-E3 Service Manual preview
RS260-E3
Brand: Asus Pages: 176
Asus RS520-E8-RS12-E User Manual preview
RS520-E8-RS12-E
Brand: Asus Pages: 202
Asus RS700-E7/RS8 User Manual preview
RS700-E7/RS8
Brand: Asus Pages: 194
Asus RS700-E7/RS4 User Manual preview
RS700-E7/RS4
Brand: Asus Pages: 196

Brands by name

Popular brands

Load more brands