background image

60

4.6 Firewall

The wireless router can serve as a hardware firewall for your 
network. 

NOTE

:  The Firewall feature is enabled by default.

4.6.1 General

To set up basic Firewall settings:

1.  From the navigation panel, go to 

Advanced Settings

 > 

Firewall 

General

 tab.

2.  On the 

Enable Firewall

 field, select 

Yes.

3.  On the 

Enable DoS protection

, select 

Yes

 to protect your 

network from DoS (Denial of Service) attacks though this may 

affect your router’s performance. 

4.  You can also monitor packets exchanged between the LAN 

and WAN connection. On the Logged packets type, select 

Dropped

Accepted

, or 

Both

.

5. Click 

Apply

.

4.6.2 URL Filter

You can specify keywords or web addresses to prevent access to 
specific URLs.

NOTE

:  The URL Filter is based on a DNS query. If a network client has 

already accessed a website such as http://www.abcxxx.com, then the 

website will not be blocked (a DNS cache in the system stores previously 

visited websites). To resolve this issue, clear the DNS cache before 

setting up the URL Filter.

Summary of Contents for 90IG01N0-BM3000/10






































































































Reviews: