2-18
Chapter 2: BIOS Setup
Memory Configuration
Memclock Mode
[Auto]
MCT Timing Mode
[Auto]
Hardware Memory Hole
[Disabled]
Memory Configuration
Memclock Mode [ Auto]
Allows you to set the memory clock mode. Set by the code using [Auto] or
select [Limit] to set using one of the standard values.
Configuration options: [Auto][Limit]
CAS Latency (CL) [Auto]
Sets the CAS Latency. Configuration options: [Auto] [2.0] [3.0] [2.5]
TRAS [Auto]
This item sets the TRAS.
Configuration options: [Auto] [5 CLK] [6 CLK] [7 CLK] [8 CLK] [9 CLK]
[10 CLK] [11 CLK] [12 CLK] [13 CLK] [14 CLK] [15 CLK]
TRP [Auto]
Sets the TRP.
Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
TRCD [Auto]
Sets the TRCD.
Configuration options: [Auto] [2 CLK] [3 CLK] [4 CLK] [5 CLK] [6 CLK]
The following items appear only when the MCT Timing Mode is set to
[Manual].
MCT Timing Mode [Auto]
Allows you to set the MCT timing mode. Set by the code using [Auto] or
select [Manual] to set using one of the standard values.
Configuration options: [Auto] [Manual]
The following items appear only when the Memclock Mode is set to
[Limit].
Memclock Value [100MHz]
This item sets the Memclock value.
Configuration options: [100MHz] [133MHz] [166MHz] [200MHz]
