4
1.2.
In Linux Host
1.
Unzip image compression file on Ubuntu Host PC.
$tar -zxvf ACLinux_4.9_{OS_IF}.{PLF_IF}.{PJ_IF}.{BN}.tar.gz
2.
Connect the BOXER-8233AI to power supply.
3.
Press and hold down the recovery key and then press the power key.
After 2 seconds, release the recovery key. The target board should
enter recovery mode
4.
Connect Host PC and BOXER-8233AI via micro USB.
5.
If device is in recovery mode, lsusb command on host PC will list a
line of “0955:7c18 NVidia Corp”
