PICO-KBU4-SEMI Quick Installation Guide
Step 5:
Remove nut and washer from DC jack. Connect fan power cable to board (CN15).
Step 6:
Insert the PICO-WHU4 board into the chassis assembly with the processor side toward the heatsink. DO
NOT place the CMOS battery between the board and thermal assembly. Make sure the processor is contacting
the thermal padding and the holes line up with board and mounting points.
Step 7:
Check that the I/O ports are properly aligned. Secure board with four nickel screws.
Step 9:
Remove the adhesive backing from the CMOS battery. Attach battery to chassis.
Note:
Make sure the fan power cable runs
between the board and heatsink and does
not come into contact the fan blades.
Step 8: :
Reattach nut and washer to DC jack.
