33
Editing Your Service Connection
Service Connection
1.
To view or edit the ADSL connection service address, Right-click the
Diagnostic
Tool
icon
(located on the Taskbar), and select the
Configuration
option.
2.
The
PVC Setup
(Permanent Virtual Connection) window displays the connection
service address. Click
Close
to exit window.
3. To edit the
connection service address
, select and enter the VPI and VCI
address in the field shown and click
PVC Setting
.
4. To accept a
Connection Address
that has been changed (
Restart
the PC
System) Click
Yes
.
NOTE:
A PC system restart will begin once the connection address change is
accepted.
IP Configuration
1.
This section includes the IP configuration specifics for Windows NT4.0. The NT 4.0
windows are slightly different from those of Windows 95 /98. Other than minor
screen differences, the process for editing the IP address settings is the same for
Windows NT 4.0 and Windows 95/98.
2.
At the desktop, double click
My Computer
, then double click
Control Panel
to
view the contents of the control panel. In the
Control Panel
window, double click
the
Network
icon.
Note
: The Network window shortcut is a right-click the
Network Neighborhood
on
your desktop then left-click
Properties
.
3.
Select the
Protocols
tab of the network window. Select
TCP/IP
Protocol and click
Properties
.
4.
Select the
IP address
option and note that the IP Address and Subnet Mask regions
will turn from gray to active.
5.
Enter the IP Address (e.g. 192.168.4.39) and Subnet mask (e.g. 255.255.255.0).
6.
The
Default Gateway
is also entered in this window.
NOTE
: Please refer to your ADSL service provider and enter (or edit) the following
fields:
7.
Enter the
Host Name
and
Domain
NOTE:
To enter the Domain search (DNS) entries, click
Add
then enter the
address. Click
Add
to save the address. Repeat the process for additional DNS
entries.
Click
OK
to update the changes.
Summary of Contents for AAM6000PI
Page 1: ...AAM6000PI ADSL Modem Card ...
