36
Re-training Count
tracks the number of ADSL
connections performed. Due to unexpected line
condition changes, the drivers can retrain the
connection causing the
Re-training Count
total to
increment. The Diagnostic Tool icon will flash yellow
while reconnecting.
ADSL
implements Reed Solomon (RS) error checking:
FEC Count
tracks the forward error correction count.
CRC Count
tracks the accuracy of correcting data
errors over each 17msec.
ATM HEC
Count
(header error check) errors are
recorded as an indication of ATM packet accuracy.
As a measure of packet transfer performance, the
Packet Errors
are counted and tracked against the
total number of
Packets Received
.
Diagnostic window
is used to verify the ADSL
modem card functionality. Running the
Diagnostic
program will disconnect the NIC from the ADSL line.
Close all Dial-up sessions and close all files before
running the Diagnostic program. Product Information,
e.g. driver revisions are displayed by clicking the
Product Info
tab.
Product Information
lists the versions of the
Diagnostic Tools and the driver version. The DLL
version describes the software being used by both the
drivers and Diagnostic Tool software.
Click
Run
Diagnostics
to run the diagnostic program
that will test PC functionality and report the status. A
warning message pops up that the ADSL service will
disconnect before performing the diagnostic test. If
connected to the Internet at this time, disconnect any
Dial-up sessions. Click
Yes
to begin the
diagnostic
program or click
No
to exit diagnostic program. The
diagnostic program performs a brief hardware check and displays the hardware status.
Summary of Contents for AAM6000PI
Page 1: ...AAM6000PI ADSL Modem Card ...
