background image

A S U S   A S M B 2

A S U S   A S M B 2

A S U S   A S M B 2

A S U S   A S M B 2

A S U S   A S M B 2

2 - 7

2 - 7

2 - 7

2 - 7

2 - 7

2.5

ASMB2 configuration

You must configure the network settings of both the remote server and
the local/central server to establish communication for remote server
control and monitoring. Prepare the support CD and a bootable floppy disk
to configure the network settings.

2.5.1

2.5.1

2.5.1

2.5.1

2.5.1

Running the BIOS IPMI configuration

Running the BIOS IPMI configuration

Running the BIOS IPMI configuration

Running the BIOS IPMI configuration

Running the BIOS IPMI configuration

To configure the IPMI in the BIOS:

1.

Restart the remote server, then press <Del> during POST to enter the
BIOS setup.

2.

Go to the S e r v e r  

S e r v e r  

S e r v e r  

S e r v e r  

S e r v e r  menu, then select the I P M I   C o n f i g u r a t i o n

I P M I   C o n f i g u r a t i o n

I P M I   C o n f i g u r a t i o n

I P M I   C o n f i g u r a t i o n

I P M I   C o n f i g u r a t i o n

sub-menu. Use this sub-menu to configure the IPMI settings.

3.

When finished, press <F10> to save your changes and exit the BIOS
setup.

Select Screen
Select Item

+-

Change Option

F1

General Help

F10 Save and Exit
ESC Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

BIOS SETUP UTILITY

                    Server

Server Features

Remote Access Configuration

IPMI Configuration

Select Screen
Select Item

+-

Change Option

F1

General Help

F10 Save and Exit
ESC Exit

v02.58 (C)Copyright 1985-2004, American Megatrends, Inc.

BIOS SETUP UTILITY

                    Server

IPMI Configuration

BMC Firmware version:

1.00-1.00

Boot Option Uses

[System]

OS Boot Timeout

[Disabled]

Timeout Value

[  0]

Clear System Even Log

[Disabled]

BMC Time Sync.

[Enabled]

System Event Log
LAN Setting

IPMI Configuration

IPMI Configuration

IPMI Configuration

IPMI Configuration

IPMI Configuration

System: Boot Option
is controlled by
BIOS.

BMC: Boot Option is
controlled by BMC.

Summary of Contents for ASMB2































































Reviews: