ASUS ASMB9-iKVM
2-3
2.3
Firmware update and IP configuration
You need to update the ASMB9-iKVM firmware and configure IP source before you start
using the ASMB9-iKVM board.
2.3.1
Firmware update
To update the firmware:
1.
Insert the support CD into the optical drive.
2.
Restart the remote server then press <Del> during POST to enter the BIOS setup.
3.
Go to the Boot menu and set the Boot Device Priority item to [CD-ROM].
4.
When finished, press <F10> to save your changes and exit the BIOS setup.
5.
On reboot, select
ASMB9-iKVM Firmware Update for Clear Configuration
from the
main menu and press <Enter> to enter the sub-menu.
6.
From the confirmation message, select <Yes> to update the firmware.
7. Wait for the firmware updating process to finish.
FreeDOS command prompt
Configure BMC IP Source Static IP for Shared LAN
Configure BMC IP Source DHCP IP for Shared LAN
Configure BMC IP Source Static IP for DM_LAN1
Configure BMC IP Source DHCP IP for DM_LAN1
ASMB9 Firnware Updated for Preserve Configuration (SDR, LAN, Username)
ASMB9 Firnware Updated for Clear Configuration (SDR, LAN, Username)
ASUS Server Z11PP-D24 Series System
WARNING !!!
UPDATE ASMB9 FIRMWARE NOW !
DO YOU WANT TO CONTINUE ?
No
Yes
You may update the firmware from the web-based user interface. Refer to the
3.10
Maintenance
section for more information.