AX-125/145 SIP VoIP Router Quick Installation Guide
34
Table 2: Default Call Functions Settings
Function
Press key
(Default)
Usage
Blind transfer Flash + *98
Transfer the call to another party without notifying the
recipient.
Attend transfer Flash + *88
Put the active call on hold and transfer the call to another
party. Put down your phone when transfer is done.
Conference
Flash + *89
Put the active call on hold, make a call to another party, and
press Flash key for a three-way conference call.
Speed Dial
*68n
You can define eight speed dial entries (from 1 to 8) in the
AX-125/145's web GUI.
The value ‘n’ indicates the predefined speed dial number.
Phone book
dial
*67n
You can defined eight phone book entries (from 1 to 8) in the
AX-125/145's web GUI.
The value ‘n’ indicates the predefined phone book number.
PSTN access
code
*90
Switch the phone set connected to FXO RJ11 port of the
PSTN line. It will automatically switch back to VoIP after the
phone is put down.
Call Pickup
*78n
Pick up the incoming call of another party on AX125/145.
The value ‘n’ indicates the predefined phone number of the
other party on AX125/145.
4. SIP Operation Guide
4.1 IVR operation
You can pick up the phone set and dial “****” to enter the IVR main menu then
press the commands listed below to check or set the LAN IP. You can access
AX-125/145 WEB GUI after you have the LAN IP. Refer to
Table 1
on page 7 the
IVR operation command codes.
You can select from these two (2) types of languages for the IVR voice prompt:
Chinese or English. Refer to section
3.4.1 System Setting
on page 17 for more
details.
4.2 Call Service Features
ASUS AX-125/145 has some predefined call function services and they are
configurable by WEB GUI.
Table 2
describes the operation of these call functions.
