ASUS BP5265/AS-D770
3-39
3.9
Intel
®
ME configuration
This function allows you to configure the Intel
®
Management Engine (ME) settings.
Ensure that the ME function is enabled before configuring the settings. To
enable the ME function, refer to pages 4-24 and 4-24 for details.
To launch the Intel
®
ME Setup
The following screen appears after the Power-On-Self-Test (POST). Press
<Ctrl>
+ P
to launch the Intel
®
ME Setup screen.
Intel(R) Management Engine BIOS Extension v5.0.5.0001
Copyright(C) 2003-08 Intel Coporation. All Rights Reserved.
Intel(R) ME Firmware version 5.0.0.1098
Press <CTRL-P> to enter Intel(R) ME Setup.
3.9.1
Change Intel
®
ME password
You are required to change the password when entering the setup for the first time.
By default , the password is
admin
.
To change the password:
1. Key in
admin
in the
Intel(R) ME Password
area, then press <Enter>.
2. Key in a new password in the
Intel(R) ME New Password
area and press
<Enter>.
3. Key in the password again in the
Verify Password
area and press <Enter>.
A valid password must include uppercase and lowercase letters, special
characters (such as ~,%,*,#), and numbers.
Intel(R) Management Engine BIOS Extension v5.0.5.0001
Copyright(C) 2003-08 Intel Coporation. All Rights Reserved.
Intel(R) ME Configuration
Change Intel(R) ME Password
Exit
[
MAIN MENU
]
[ESC]=Exit
[Enter]=Access
Intel(R) ME Password