12
ASUS C-PKND User’s Manual
4. Central Processing Unit (CPU)
The C-PKND CPU card provides two Single Edge Contact (SEC) slots for
Pentium II processors packaged in SEC cartridges.
This section provides information about the C-PKND CPU card and ex-
plains how to install the Pentium II processor into the CPU card, assemble
the different components into the CPU card, and finally, install the CPU
card into your computer.
ASUS C-PKND Components
Check to see that your card came with the following components:
III. INSTALLATION
(CPU)
III. INST
ALLA
TION
1. Top support bar (1)
7. ASUS C-P2T CPU termination card (1)
2. Pan head washer screws (6)
8. Guide plate retainer (1)
3. Pan head screws (2)
9. Pan trim head washer screw (1)
4. Plastic rings (2)
10. Hex washer screws
*
(2)
5. Guide plate (1)
11. Support bar brackets
†
(2)
6. Retention mechanisms (2)
*
Common screws available with system case.
†
Two are provided to accommodate differences in system case configurations. Only
one is necessary when using Chenbro Micom’s case or Chieftec Industrial’s case.
ElanVital Corp’s cases do not require a bracket. See page 23 for details on these
suppliers.
2
7
4
3
9
6
10
2
8
5
2
2
6
10
11
1
2
3
4
