DS300f G2 Series User Manual
111
m
akInG
I
ScSI t
arGet
S
ettInGS
To make target settings:
1. Click the
Device
tab.
2. Click the
iSCSI Management
icon.
3. Click the
Target
tab.
4.
Click the target you want, then click the
Settings
button.
5. Make settings changes are required:
•
Alias
•
Enable Header Digest
•
Enable Data Digest
•
Enable Uni-directional CHAP Authentication
•
Enable Bi-directional CHAP Authentication
•
Enable NOP-In
6. Click the
Submit
button.
v
IewInG
a
l
ISt
of
I
ScSI P
ortalS
To view a list of iSCSI portals:
1. Click the
Device
tab.
2. Click the
iSCSI Management
icon.
3. Click the
Portal
tab.
Portal information includes:
• ID
– Portal number. Starts at 0.
• IP Address
– IP address of the portal.
• Controller ID
– RAID controller ID, 1 or 2.
• Port ID
– Physical port on the RAID controller, 1 to 4.
• Trunk ID
– Trunk ID, 1 to 8. Refers to portals associated with a trunk (link
aggregation). N/A means this portal is not associated with a trunk.
• VLAN Tag
– VLAN Tag, 1 to 4094. Refers to portals associated with a Virtual Local
Area Network (VLAN). N/A means this portal is not associated with a VLAN.
v
IewInG
I
ScSI P
ortal
I
nformatIon
To view information about a portal:
1. Click the
Device
tab.
2. Click the
iSCSI Management
icon.
3. Click the
Portal
tab.
4.
Click the portal you want, then click the
View
button.
Portal information includes:
• Portal ID
– Portal number. Starts at 0.
• Trunk ID
– 1 to 8. Refers to portals associated with a trunk (link aggregation).
N/A means this portal is not associated with a trunk.
• Controller ID
– RAID controller ID, 1 or 2.
• VLAN Tag
– 1 to 4094. Refers to portals associated with a Virtual Local Area
Network (VLAN). N/A means this portal is not associated with a VLAN.
• PrimaryIP
- IP Address
• PrimaryIPMask
- subnet mask
• Gateway
- IP address of the gateway routing device
• Port ID
– Physical port on the RAID controller, 1 to 4.
• Interface Name
– Ethernet interface names.
• Associated Type
– PHY, VLAN, or Trunk.
• DHCP
– Enabled or disabled.* DHCP is currently supported only for IPv4.
• TCP Port Number
– TCP port number. 3260 is the default and recommended number.
• Assigned Targets
– IDs of the targets to which this Portal is
assigned. N/A means no target is assigned.
See "Adding iSCSI Portals" on page 111
Items marked with an asterisk (*) are adjustable under
"
Making iSCSI Portal Settings"
a
DDInG
I
ScSI P
ortalS
ASUS DS300f G2 supports up to 32 iSCSI portals. Each iSCSI portal can belong to a different VLAN for a
maximum of 32 VLANs.
If you plan to associate the new portal with a trunk, create the trunk first. See “Adding iSCSI Trunks” on
page 113.
For more information about iSCSI VLANs, see
Summary of Contents for DS300 G2 Series
