DS300f G2 Series User Manual
160
v
IewInG
uPS I
nformatIon
(clu)
To view information about a specific
UPS unit:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
UPS Management
and press
Enter
.
3. Highlight the UPS unit you want and press
Enter
.
UPS information includes:
•
UPS ID
•
Model Name
•
Serial Number
•
Firmware Version
•
Manufacture Date
•
Voltage Rating
– Output voltage of the UPS.
•
Battery Capacity
– Backup capacity expressed as a percentage.
•
Remaining Backup Time
– Number of minutes the UPS is expected
to power your system in the event of a power failure.
•
Loading Ratio
– Actual output of UPS as a percentage of the rated output. See the Note below.
•
Temperature
– Reported temperature of the UPS unit.
Note
The maximum recommended Loading Ratio varies among models of UPS units. The
general range is 60% to 80%. If the reported Loading Ratio exceeds the recommended
value for your UPS unit:
Have fewer subsystems or peripherals connected to this UPS unit.
Add more UPS units, or use a higher-capacity UPS unit, to protect your RAID systems.
M
anaGInG
u
sers
(Clu)
User Management includes the following functions:
•
"Viewing User Information (CLU)" on page 160
•
"Creating a User (CLU)" on page 160
•
"Changing Another User’s Settings (CLU)" on page 161
•
"Changing Your Own User Settings (CLU)" on page 161
•
"Changing Another User’s Password (CLU)" on page 161
•
"Changing Your Own Password (CLU)" on page 162
•
"Deleting a User (CLU)" on page 162
v
IewInG
u
Ser
I
nformatIon
(clu)
Each user types their user name and password to log into the CLI.
To view a list of current user accounts:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
User Management
and press
Enter
.
A list of the current users appears.
c
reatInG
a
u
Ser
(clu)
To create a new user account:
1. From the Main Menu, highlight
Additional Info and Management
and press
Enter
.
2. Highlight
User Management
and press
Enter
.
3. Highlight
Create New User
and press
Enter
.
4.
Highlight each field and type in the appropriate information:
•
User name
(Maximum 31 characters. Use letters, numbers, and underscore. No spaces.)
•
Password
(Optional. Maximum 31 characters. Use letters, numbers, and underscore.)
•
Display name
(Optional)
•
User’s email address
Summary of Contents for DS300 G2 Series
