Asus DS300f User Manual Download

Page: 193 / 449

17
4

Chapter 4: Management with ASUS Storage Management

7. If you selected a Dedicated spare drive, in the Dedicated to Disk Arrays field,

highlight the disk arrays to which you want assign the spare drive from the
Available list and press the

button to move them to the Selected list.

You can also double-click array to move it.

8. Click the

Submit

button.

Running Spare Check

Spare Check verifies the operational status of your spare drives. You can also
schedule a Spare Check. See

―Scheduling an Activity‖ on page 72.

To check a spare drive:

1. Click the Subsystem

icon in Tree View.

2. Click the Spare Drives

icon.

3. Click the

Spare Check

tab in Management View.

4. From the Physical Drive dropdown menu, choose the spare drive you want

to check.

Or choose

All

to check all the spare drives at the same time.

5. Click the

Submit

button.

The results of the Spare Check appear under Spare Check Status in the
Information ta

b. ―Healthy‖ means normal condition.

Summary of Contents for DS300f


































































































































































































































































































































































































































































Search results

Summary of Contents for DS300f

Reviews:

Related manuals for DS300f

Brands by name

Popular brands

Asus DS300f, User Manual

Search results

Summary of Contents for DS300f

Reviews:

Related manuals for DS300f

Brands by name

Popular brands