background image

44

E520

Regulatory notices

REACH

Complying with the REACH (Registration, Evaluation, Authorization, 

and Restriction of Chemicals) regulatory framework, we publish 

the chemical substances in our products at ASUS REACH website at 

http://csr.asus.com/english/REACH.htm

ASUS Recycling/Takeback Services

ASUS recycling and takeback programs come from our commitment 

to the highest standards for protecting our environment. We believe 

in providing solutions for you to be able to responsibly recycle our 

products, batteries, other components, as well as the packaging 

materials. Please go to http://csr.asus.com/english/Takeback.htm 

for the detailed recycling information in different regions.

COATING NOTICE

IMPORTANT! To provide electrical insulation and maintain electrical 

safety, a coating is applied to insulate the device except on the areas 

where the I/O ports are located.

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is 

subject to the following two conditions:
•  This device may not cause harmful interference, and
•  This device must accept any interference received including 

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide reasonable protection against 

harmful interference in a residential installation. This equipment 

generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with manufacturer’s instructions, 

may cause harmful interference to radio communications. However, 

there is no guarantee that interference will not occur in a particular 

installation. 

Summary of Contents for E520



















































Reviews: